8. Check list
Check items Content Result
There is no damage and have a good isolation
against grounding.
Antenna installation
Antenna type (Wire / Whip)
The ground plate is welded near the tuner and
cupper plate is not damaged.
Tuner grounding
Tuner location (Indoor / Outdoor)
Self check Carry out Menu 14.
Position update Check the position in NCT-196N is updated.
General
DC operation Possible to operate only by DC power source.
Check and adjust by menu 41.
2MHz
Level Vc Ic Ia
Check and adjust by menu 41.
4MHz
Level Vc Ic Ia
Check and adjust by menu 41.
6MHz
Level Vc Ic Ia
Check and adjust by menu 41.
8MHz
Level Vc Ic Ia
Check and adjust by menu 41.
12MHz
Level Vc Ic Ia
Check and adjust by menu 41.
16MHz
Level Vc Ic Ia
Check and adjust by menu 41.
18MHz
Level Vc Ic Ia
Check and adjust by menu 41.
22MHz
Level Vc Ic Ia
Check and adjust by menu 41.
Transmission
25MHz
Level Vc Ic Ia
TEL mode Communication test Communicate with suitable coast station.
Self test Carry out the modem loop test.
Communication test Communicate with suitable coast station.
DSC mode
Printer operation The received DSC file is printed out.
Self test
Communication test Communicate with suitable coast station.
NBDP mode
Printer operation The communication result is printed out.
Frequency selection Watch frequency can be selected.
W/K receiver
Reception Check the received distress messages.
JSB-196GM Check by menu 15.
NAH-692/695/698 Check by menu 15.
DSC main Check by start up screen of NCT-196N.
DSC sub Check by start up screen of NCT-196N
NBDP main Check by help menu of NDZ-127J.
NCT-
196N
NBDP sub Check by ROM seal.
NDZ-127J Check by help menu of NDZ-127J
Software
version
NFC-296/896 Check by menu 15.
96
To Next Page
Loading...
