JRC JSS-296 - JSB-196 GM Radiotelephone

4.7 JSB-196GM Radiotelephone
4.7.1 Operation Check
After installation, execute the operation check with the self-diagnosis function.
Procedure
TX FREQ
RX FREQ
CHECK
25,070.0 kHz
AGC
26,145.0 kHz
14
(a) Select the MENU number 14 by the jog dial or 10key.
or
“CHECKING NOW” blinks in the LCD.
When the check is complete, confirm that “CHECK
OK” is displayed.
If the defected part is found, messages will be scrolled
in the LCD.
Messages
・ NAH-NFC SERIAL
・ NO ATU
・ DSP SERIAL
・ CMN-1960 TRX UNIT
・ CAH-1960 PA UNIT
・ NAH CHARGER
・ BATTERY
・ BATTERY OUT
・ NAH PA 80V
・ NAH ARRESTER
・ NAH PA(A) TR / NAH PA(B) TR / NAH PA(C) TR
・ NFC DUMMY OR L-RELAY
・ NFC DUMMY OR C-RELAY
・ NFC
・ NAH-NFC RF CABLE
・ JSB-NAH RF CABLE
・ NAH PA(A) OR COMBINER / NAH PA(B) OR COMBINER / NAH PA(C) OR COMBINER
・ NAH SPLITTER
Refer to 5.5 about the details of a message.
TX FREQ
RX FREQ
N-1960 TR
25,070.0 kHz
AGC
26,145.0 kHz
X U
RDY
RDY
MENU
Turn the
j
o
g
dial
ENT
TX FREQ
RX FREQ
CHECKING
25,070.0 kHz
AGC
26,145.0 kHz
NoW
ENT
4
1
MENU
RDY
TX FREQ
RX FREQ
CHECK
25,070.0 kHz
AGC
26,145.0 kHz
oK
RDY
Note
66