JRC JSS-296 - User Channel Registration; Input the RX;TX Frequency; Semi-Duplex Frequency Registration

4.7.2 User Channel Registration
Ups to 200 user channels, number 1 to 200, are available for frequently use.
Procedure
(a) Select the MENU number 7 by the jog dial or
keypad.
TX FREQ
RX FREQ
USR MEMo
25,070.0 kHz
AGC
26,145.0 kHz
7
RDY
TX FREQ
RX FREQ
USR- 1
- - ,- - - .- kHz
AGC
- - ,- - - .- kHz
1
RDY
TX FREQ
RX FREQ
USR MEMo
- - ,- - - .- kHz
AGC
4,100.0 kHz
7
RDY
TX FREQ
RX FREQ
USR- 1
- - ,- - - .- kHz
AGC
- - ,- - - .- kHz
TEL
RDY
Turn the
j
o
g
dial
ENT
MENU
or
MENU
7
ENT
(b) Select channel number by the jog dial or keypad.
or
Turn the
j
o
g
dial ENT
ENT
In
p
ut the ke
yp
ad
(c) Select the emission mode by the jog dial.
Turn the
j
o
g
dial
ENT
In a registered channel, if the mode is
selected for "CLR", elimination of a channel
can be performed.
Note
(d) Input the RX/TX frequency.
・Simplex frequency registration
Input RX frequency and press twice.
ENT
(e.g. RX/TX=4100.0kHz)
4 ENTENT0 0 0 1
・Semi-duplex frequency registration
TX FREQ
RX FREQ
USR MEMo
4,500.0 kHz
AGC
4,200.0 kHz
7
RDY
Input RX frequency and TX frequency each.
(e.g. RX=4200.0kHz, TX=4500.0kHz)
2 0 0 0 ENT
4 ENT0 0 0 5
4
(e) Input the channel label.
“_ (Space)” blinks in the LCD.
If the channel label is not required, press the
and complete the registration.
Select an alphabet or number with the jog dial or
keypad, and press or to set it.
After complete the registration, go to step (b) for
further registration or press to exit the
registration mode.
TX FREQ
RX FREQ
JSB-1_
4,100.0 kHz
AGC
4,100.0 kHz
7
RDY
ENT
ENT
CLR
CLR
67