JRC JSS-296 - Unit setting procedure

4. INITIAL-SETTING
4.1 Unit setting procedure
Start
DC source
Set the charge function to ON
(Refer to 4.2.1)
Adjust the charge voltage
(Refer to 4.2.2)
Set the Self-ID
(Refer to 4.5.1)
Set the Charge Function to OFF
(Refer to 4.2.1)
Set the scanning frequency
(Refer to 4.5.2)
Set the Date and time
(Refer to 4.5.2)
Set the user channel
(Refer to 4.7.2)
Adjust Tx power
(Refer to 4.7.6)
End
Battery
DC power Supply unit
NAH-692/695/698
Power Amplifier
NCT-196N
DSC/NBDP Modem
NDZ-127J
Data Terminal
JSB-196GM
Radiotelephone
NKG-800
Printer
Setting the Printer character
(Refer to 4.3.1)
Set the battery operation
(Refer to 4.2.3)
Set the Self-ID
(Refer to 4.6.1)
NCT-196N
DSC/NBDP Modem
Tx adjust
Not
necessary
Necessary
Set the navigation format
(Refer to 4.5.1)
46