JRC JSS-296 - Printer Selector; Printer Selector SW-ATB21 K(2:1); MODE Switch; TIME out Switch

・ Show the Dip switch setting for each equipment below.
Note
Equipment DIP switch setting
JSS-296/596/896 (NCT-196N/NDZ-127J)
JSS-825D (NCT-620D)
NCT-196
NCT-196N
JSS-296/596/896(NCH-1961/1962)
JSS-850
JUE-75C (NDZ-127C)
1 2 3 4 5 6 7 8
OFF
ON
DIP switch
JSS-825NA/NC (NDZ-127N)
1 2 3 4 5 6 7 8
OFF
ON
DIP switch
4.4 Printer selector
Set the MODE and TIME OUT switches as follows.
MODE switch
Set the MODE switch to “AUTO”.
TIME OUT switch
Set the TIME OUT switch to “0.5”.
1 2 3 4 5 6 7 8
OFF
ON
DIP switch
B
AUTO
RESET
MANUAL
15 10 0.5
MODE TIME OUT
SECONDS
I/O
A
Printer Selector SW-ATB21K(2:1)
53