JRC JSS-296 - Setting of JSB-196;JSB-196 GM User Channel; Simplex Frequency Registration

Attached documents 2 (2)
Setting of JSB-196/JSB-196GM user channel
Nov 5, 2004
Register the user channel and Group name, and adjust the channel power as follows.
1. User Channel Registration
The frequencies used frequently can be registered into the user channels (1ch - 200ch).
Procedure
TX FREQ
RX FREQ
USR MEMo
25,070.0 kHz
AGC
26,145.0 kHz
7
RDY
TX FREQ
RX FREQ
USR- 1
- - ,- - - .- kHz
AGC
- - ,- - - .- kHz
1
RDY
TX FREQ
RX FREQ
USR MEMo
- - ,- - - .- kHz
AGC
4,100.0 kHz
7
RDY
TX FREQ
RX FREQ
USR- 1
- - ,- - - .- kHz
AGC
- - ,- - - .- kHz
TEL
RDY
(a) Select the MENU number 7 by the jog dial or
keypad.
Turn the
j
o
g
dial
ENT
MENU
or
MENU
7
ENT
(b) Select channel number by the jog dial or keypad.
or
Turn the
j
o
g
dial
ENT
ENT
In
p
ut the ke
yp
ad
(c) Select the emission mode by the jog dial.
In a registered channel, if the mode is
selected for "CLR", elimination of a
channel can be performed.
Turn the
j
o
g
dial
ENT
Note
(d) Input the RX/TX frequency.
・Simplex frequency registration
Input RX frequency and press twice.
(E.g. RX/TX=4100.0 kHz)
・Semi-duplex frequency registration
Input RX frequency and TX frequency each.
(E.g. RX=4200.0 kHz, TX=4500.0 kHz)
ENT
4 ENTENT0 0 0 1
TX FREQ
RX FREQ
USR MEMo
4,500.0 kHz
AGC
4,200.0 kHz
7
RDY
2 0 0 0 ENT
4 ENT0 0 0 5
4
(e) Input the channel label.
“_ (Space)” blinks in the LCD.
If the channel label is not required, press the
and complete the registration.
TX FREQ
RX FREQ
JSB-1_
4,100.0 kHz
AGC
4,100.0 kHz
7
RDY
ENT
Select an alphabet or number with the jog dial or
keypad, and press or to set it.
ENT
CLR
After complete the registration, go to step (b) for further registration or press to exit
the registration mode.
CLR
7/23