JRC JSS-296 - Upgrading of TRX Software; Upgrading of DSP Software; NCT-196 N Upgrading; NDZ-127 J Upgrading

2.2 Upgrading of TRX software
Upgrade the JSB-196/JSB-196GM software according to attached document 3
“JSB-196/JSB-196GM TRX Software upgrading procedures”
2.3 Upgrading of DSP software
Upgrade the DSP software according to attached document 4 “JSB-196/GM DSP
ROM replacement procedures”. Replace the parts (C852, R442) according to attached
document 5 “JSB-196/GM TRX UNIT Modification procedures”.
3. NCT-196N upgrading
Update the NCT-196N software according to attached document 6 “NCT-196N
(MODEM) ROMs replacement procedures”
4. NDZ-127J upgrading
Update the NCT-196N software according to attached document 7 “NDZ-127J (DTE)
ROM replacement procedures”
5. Filling in the Upgrade Recode
Fill in the required matter in attached document 8 “JSB-196/JSB-196GM, JSS-296/
596/896 Software Upgrade Record”, and return it to the following address.
Marine Service Department
E-mail:
tmsc@m1.jrc.co.jp
Fax: +81 3 3779 1420
Note: Input a "TRP: " into the head of the subject name of an e-mail.
Attached documents:
Attached documents 1: Checking of JSB-196/JSB-196GM, JSS-296/596/896 software versions
Attached documents 2 (1): Checking of JSB-196/JSB-196GM channel data
Attached documents 2 (2): Setting of JSB-196/JSB-196GM user channel
Attached documents 3: JSB-196/JSB-196GM TRX Software upgrading procedures
Attached documents 4: JSB-196/JSB-196GM DSP ROM replacement procedures
Attached documents 5: JSB-196/JSB-196GM TRX UNIT Modification procedures
Attached documents 6: NCT-196N (MODEM) ROMs replacement procedures
Attached documents 7: NDZ-127J (DTE) ROM replacement procedures
Attached documents 8: JSB-196/JSB-196GM, JSS-296/596/896 Software Upgrade Record
3/23