3.6.6 Replacing the Ribbon Cassette Cartridge
When the printing quality becomes faint, replace the ribbon cassette cartridge with a new one.
To replace, proceed as follows.
CAUTION
Be sure to turn OFF the printer power when opening and closing the printer cover.
Failure to comply could result in electrical shock, failure, or injury.
Just after printing, the temperature of the printer head is high. Do not touch the printer head
until the temperature goes down.
Failure to comply could result in a burn or injury.
Do not touch any part of the cutter. Doing so may result in injury.
Procedure
1. Open the printer cover.
Note
・ To open the printer cover, refer to 3.6.4.
2. Lift up the tip of the ribbon cassette cartridge by grasping the projection on top,
and remove it.
42
To Next Page
Loading...
