JRC JSS-296 - Frequency Scanning; Frequency Calling; Date & Time Settings; Displaying the “SETUP” Display

4.5.2 Frequency Scanning / Frequency Calling / Date & Time Settings
Perform these settings from the “SETUP” display.
4.5.2.1 Displaying the “SETUP” display
Procedure
(a) Confirm that the “DSC watching” display appears.
The “DSC watching” display appears when the power is turned on. Almost all operations
start from this display. This display also returns when exiting each mode is closed.
(b) Press .
The “MENU #1” display appears.
(c) Press .
The “MENU #2” display appears.
DSC watching 06.Sep.2001(Thu) 01:26
N12’34 E123’45 SPEED:12.4KT at 01:26
Self-ID = 111111111 [UTC]
Note
MENU
MENU
(d) Select “3.Setup” and press .
The “Setup” display appears.
ENT
SETUP Select no.
1.Date&time edit
2.Position edit
3.Calling frequency registration
4.Address registration
5.Distress setup
Use and to scroll.
6.Others alarm setup
▼
7.Automatic acknowledgement setup
▲
8.Scanning setup
9.Watchkeeping receiver setup
56