3.6 Printer INSTALLATION
Install the Printer in a location that meets the following conditions:
・ A location with minimal vibration.
・ A location where the distance between the Printer selector and Printer does not exceed the length of the
dedicated cable with connector (L=1.5m).
・ A location 1.5m or further from a magnetic compass.
3.6.1 Ensuring Maintenance Space and Positioning
When installing the unit, ensure that the required maintenance space, as shown in the Figure below, is
provided. Assure that adequate maintenance space is available when selecting the installation. Also be
sure to secure the printer using the supplied Velcro tape.
380 19
280
MIN.
150
MIN. 430
380
MIN.
150
50
280
31
65
MIN.
150
376
108 45
40
193
MIN. 500
Figure 3-15 Printer Maintenance Space
32
To Next Page
Loading...
