JRC JSS-296 - Group Name Registration for User Channel

4.7.3 Group Name Registration for User Channel
200 user channels are separated into 10 groups, 20 channels each, for scanning reception and labels
are available for easy selection. Follow the steps below to register a group name.
Procedure
TX FREQ
RX FREQ
GRP MEMo
4,500.0 kHz
AGC
4,200.0 kHz
8
RDY
TX FREQ
RX FREQ
GRoUP 1
4,500.0 kHz
AGC
4,200.0 kHz
1
RDY
TX FREQ
RX FREQ
_
4,500.0 kHz
AGC
4,200.0 kHz
1
RDY
(a) Select the MENU number 8 by the jog dial or keypad.
Turn the
j
o
g
dial
ENT
MENU
or
ENT
8
MENU
(b) Select the group number with the jog dial, and then
press .
ENT
(c) Input the group name.
“_ (Space)” blinks in the LCD.
If the channel label is not required, press the
and complete the registration.
Select an alphabet or number with the jog dial or keypad, and
press or to set it.
ENT
ENT
CLR
TX FREQ
RX FREQ
SSB GRP_
4,500.0 kHz
AGC
4,200.0 kHz
1
RDY
After complete the registration, go to step 3.3 for further
registration or press to exit the registration
mode.
CLR
68