JRC JSS-296 - A Reference Method of Distress Transmission History

4.5.4 A reference method of Distress Transmission History
Procedure
(a) Change the switch (SW1) No.4 to off before power on. And then both press and “POWER
SWITCH” to access the following the “INSTALLATION SETUP” menu.
Select “History” using / .
MENU
INSTALLATION SETUP
Self-ID : 111111111
Group-ID : 022222222
Navigation : NMEA0183
Serial cont: ON
Data clear : OFF
SPACE signal send
MARK signal send
DOT signal send
70-TIME MESSAGE send
WKR frequency : 2,187.5
WKR step test
History
(b) Press .
4.-------------
・
・
20.-------------
The case of following Transmission History,
1 200012081245
① ②
① : A leadoff character “1” ・・・ Transmitted the DISTRESS call to another ships
A leadoff character “0” ・・・ Pressed button over 3.5sec
② :The example of eccentric, indicates the date (day, month and year) and time.
08. Dec. 2000, 12:45 (This time is shown by “UTC”)
ATTENTION
When the case of initialization for History, ID is initialized simultaneously.
(c) F When confirm the message, select the line for a leadoff character “1”. Press .
Output message is declared the ASCII character.
▲ ▼
ENT
History
1.1200012081245
2.0200012081245
3.-------------
DISTRESS
ENT
200012081245
70 70 0B -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- --
Note
Note
61