JRC JSS-296 - JSB-196;JSB-196 GM DSP ROM Replacement Procedures

Attached documents 4
JSB-196/JSB-196GM DSP ROM Replacement procedures
Nov 5, 2004
Replace the ROM as follows.
1. If the Radio Equipment is JSS-296/596/896, turn off the “AC” and “DC” switches
of NAH-692/695/698.
2. Remove the front panel.
Unscrew 4 screws.
3. Pull out the Unit.
Unscrew 4 screws.
4. Remove the rail board.
Unscrew 8 screws.
14/23