JRC JSS-296 - Date & Time Settings

DATE&TIME EDIT
Date(dd.mm.yy) :01.11.96
Time(hh:mm) :19:00
Time difference:-05:00
Display time :UTC
Use and to scroll.
4.5.2.4 Date & Time Settings
Set the date(Year,Month,Day), time and the time difference between local time and UTC (Universal
Time Coordinated) time.
Procedure
(a) Press from the “SETUP” display and then press
.
The “DATE & TIME EDIT” display appears.
ENT
1
SETUP Select no.
1.Date&time edit
(b) Using the number keys, input the numerical value for each item and press .
When set to display LT(Local Time), input the “Time difference” between local time
and UTC.
Use / to toggle between “+/-” or “UTC/LT”.
(c) After input is complete, press and then (SAVE). The “SETUP” display returns.
The input contents are entered when is pressed followed by in step (c), not
when is pressed in step (b).
Press and then to cancel the set contents and end the setting operation.
2.Position edit
3.Calling frequency registration
4.Address registration
5.Distress setup
Use and to scroll.
6.Others alarm setup
7.Automatic acknowledgement setup
▲
▼
8.Scanning setup
9.Watchkeeping receiver setup
▲
▼
ENT
Note
FUNC
9
9
Note
FUNC
ENT
4
FUNC
59