JRC JSS-296 - Test Tone Setting

4.7.4 Test Tone setting
Transmission by the Test Tone can be performed in the TEL mode.
Procedure
TX FREQ
RX FREQ
TESTToNE
4,500.0 kHz
AGC
4,200.0 kHz
28
RDY
(a) In the TEL mode, select the MENU number
28 by the jog dial or keypad.
Turn the
j
o
g
dial
ENT
MENU
or
2
MENU ENT
8
(b) Select “ON” or “OFF” by the jog dial and
press .
TX FREQ
RX FREQ
TESTToNE
4,500.0 kHz
AGC
4,200.0 kHz
oN
RDY
ENT
(c) Press to exit the menu.
MENU
(d) Press PTT of Hand Microphone, in order to transmit.
Note
Test Tone is still ON until it turns off the power supply of JSB-196GM or changes
the mode.
69