A-5 NDZ-127J Data terminal software update history.
Software
version
Improvement and additional function Date
Remarks
V2.01 - 2002.08.14 JSS-296 first lot
Improved the problem which does not display position and frequencies in the DSC mode.
Improved the problem which does not erase channel indication when channel setting is canceled.
Improved the problem which does not start the scanning in AUTO-TELEX mode.
Improved the problem which does not perform scanning at the set speed.
Improved the problem which can send the unexpected directory's TLX-file at TLX communication.
V2.10
Improved the problem which does not have the left margin at the printed page.
2003.02.20 JSS-596 first lot
V2.11 Deleted unusable menu.
Added the function to reject incorrect position data.
Added the function to reject incorrect date and time data.
Added the function to reject incorrect frequency input.
Improved the readability of Destination list which is printed.
Improved the problem which mode indication of DTE (NDZ-127J) may differ from a Transceiver (JSB-196GM).
Improved the problem the status window of the format disappears if antenna tuning is executed during the formatting of floppy disk.
V2.11
Improved the problem which is indicating the start frequency of scanning during scanning.
2003.09.30 JSS-896 first lot
V3.00 Revised for new PC board. V3.00
Improved the problem which can not be viewed the characters of display if DTE (NDZ-127J) is rebooted after the display contrast is
set to minimum or maximum.
2004.02.11 PCB was modified.
V3.01 V3.01 Improved the problem which is setting the NumLock to ON automatically during the start-up process. 2004.03.12 This problem occurs
on modified PCB only.
To Next Page
Loading...
