JRC JSS-296 - Page 208

Attached documents 5
5. Remove the under cover of the JSB-196/JSB-196GM
Unscrew 4 screws.
C444
R442 (10k→220k)
C852 (100μF→4.7μF)
-
C446
+
＋
－
6. Replace C852, R442
Note: Be careful of the polarity of C852.
(
Refer to the following figure)
7. Return them in the reverse order.
Improving the TRX UNIT of the JSB-196/JSB-196GM is finished.
18/23