Attached documents 7
1.5 Replace the ROM.
Replace the ROM of the U28.
1.6 Return them in a reverse order.
2. Update
The NDZ-127J operates on RAM program, so update the RAM program by copying
ROM program as follows.
2.1 Turn on the NDZ-127J.
Turn on the “AC” switch of the NAH-692/695/698.
2.2 To finish the program of NDZ-127J, input as follows from the keyboard.
Alt + X
(*) After the input, the mode becomes the MS-DOS, and the current drive becomes C:.
2.3 To update the program, input as follows from the keyboard.
U , P , D , A , T , E , then ENT .
2.4 Finish the update.
Updating is finished.
Turn on the power of the NAH-692/695/698 and restart the NDZ-127J.
22/23
To Next Page
Loading...
