– 10 –
3-9. Precautions to be taken when installing the machine
Sewing machine dimensions after assembly : 2450 × 2580 mm (Including the space provided when the door
of control box located at the rear section of machine is opened.)
1. When X-axis feed mechanism
❷
is
moved in the direction of arrow
A
shown in the gure until its right
most position is reached, the rear end
of cable chain
❶
is brought to the
position indicated with a chained line.
In this case, cable chain
❶
protrudes
from the table by approximately
300 mm. It is therefore necessary to
provide a space of 1 m or more at the
rear of the machine so as to prevent
the cable chain from hitting against
goods or against people to cause
bodily injury.
2. When moving X-axis feed mechanism
❷
manually toward the operator's
side (in the direction of arrow
B
) for
checking the state of sewing machine
after the completion of installation,
etc., carefully check the interference
between X-axis feed mechanism
❷
and
disc presser cylinder
❸
.
2130 mm
2450 mm
1000 mm
300 mm
❶
❷
A
❸
B
❷
To Next Page
Loading...
