JUKI PS-700 - Precautions; Standard Specification of the Templates; Sewing with Large Pitches

– 30 –
6-1. Standard specication of the templates
6. PRECAUTIONS
1. Sewing area : 1200 × 700 mm
2. Maximum outside dimensions : 1260 × 825 mm
3. Maximum weight : 5.6 kg (10 kg or less including the material weight)
4. Barcode range : 90 × 25 mm
5. Thickness of template : Total of two pieces (upper and lower templates) : 3.0 mm (recommended)
1. The minimum distance from the groove on the template to the clamp hole is 50 mm or more.
The groove dimension is 7 mm. (Dimensions marked with an asterisk (*) )
2. If the pin is not easily inserted in the clamp hole in the template when placing the template on
the sewing machine, the position of pin drive cylinder of the X-axis feed mechanism should
be adjusted.
6-2. Sewing with large pitches
If the stitch pitch is 6 mm or more when using large pitches for sewing, reverse feed stitches or condensation
stitches (reverse feed stitching or condensation stitching with the stitch pitch of 2 mm or more is recommend-
ed) should be additionally sewn at the beginning of sewing.
50 （*）
8.1
（MAX） 1200
（MAX） 700
15±0.5
3525
7（*）
（MAX） 1260
(MAX) 825
8.1
165±0.2165±0.2
165±0.2 165±0.2
4×∅16
-0.5
0
82.5 ±0.2
90
310
82.5 ±0.2
Afxing position of barcode
(supplied with the unit as an accessory)