JUKI PS-700 - Page 65

(5) Thread trimming timing
Code Description Unit Step Range
Factory
setting
Type
TRM Thread trimming switch 0 : OFF : Switch OFF
1 : ON : Switch ON
1 Selec-
tion
(6) LCD screen
Code Description Unit Step Range
Factory
setting
Type
WRN Setting of the sound of buzzer 0 : OFF : Without buzzer sound
1 : PAR : Panel operating sound
2 : ALL : Panel operating sound + error
2 Selec-
tion
LIG Brightness adjustment of
backlight
1 20 to 100 100 Input
ATO Automatic OFF switch of
backlight
0 : OFF : Not set to automatically turn OFF the
backlight
1 : ON : Set to automatically turn OFF the back-
light
0 Selec-
tion
TIM Waiting time before automati-
cally turning OFF the backlight
Minute 1 1 to 9 3 Input
PSU Unit of enlargement / reduc-
tion
0 : % : Percent
1 : SIZ : Size
0 Selec-
tion
(7) Others
Code Description Unit Step Range
Factory
setting
Type
NLD With/without needle cooler 0 : OFF : Without
1 : ATM : Needle is cooled after thread trimming
and is not cooled during sewing
2 : DSW : Needle is cooled after thread trimming
and during sewing
0 Selec-
tion
SSW Setting of sound 0 : OFF : Switch OFF
1 : ON : Switch ON
0 Selec-
tion
VOL Sound volume button 30 to 63 50 Input
LED Brightness of LED light 1 0 to 100 50 Input
– 62 –