EasyManua.ls Logo

Juniper ACX7348 - Page 5

Juniper ACX7348
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Compare the ACX7348 Order to the Packing List | 71
Install the ACX7348 in a Rack | 72
Mount an ACX7348 in a Two-Post Rack | 72
Mount an ACX7348 in a Four-Post Rack | 74
Connect ACX7348 to Power | 79
Connect Earth Ground to ACX7348 Routers | 79
Connect AC Power to an ACX7348 Router | 81
Connect DC Power to an ACX7348 Router | 83
Connect ACX7348 to External Devices | 87
Connect an ACX7348 Router to a Management Console | 87
Connect an ACX7348 Router to a Network for Out-of-Band Management | 88
Connect to 1-PPS and 10-MHz Timing Devices | 89
Connect an ACX7348 Router to a GNSS Antenna | 90
Perform Inial Soware Conguraon for ACX7348 Routers | 93
5
Maintaining Components
ACX7348 Fan Tray Maintenance | 99
Remove a Fan Tray from the ACX7348 Router | 99
Remove a Fan Tray from the Rear of the Chassis | 100
Remove a Fan Tray from the Front of the Chassis | 100
Install a Fan Tray in the ACX7348 Router | 101
ACX7348 Air Filter Unit Maintenance | 102
Install Air Filter Unit in a Two-Post Rack | 103
Install Air Filter Unit in a Four-Post Rack | 105
Replace the Air Filter | 108
Remove the Air Filter | 108
Install the Air Filter | 109
ACX7348 Power Supply Module Maintenance | 110
Remove an ACX7348 AC Power Supply Module | 110
v

Table of Contents

Related product manuals