12. Close the top of the cardboard carton and seal it with packing tape.
13. Write the RMA number on the exterior of the carton to ensure proper tracking.
Packing Switch Components for Shipping
To pack and ship switch components:
•
Place individual components in antistatic bags.
•
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
•
Close the top of the cardboard shipping carton and seal it with packing tape.
•
Write the RMA number on the exterior of the carton to ensure proper tracking.
Related
Documentation
• Returning an EX2200 Switch or Component for Repair or Replacement on page 147
Copyright © 2011, Juniper Networks, Inc.152
Complete Hardware Guide for EX2200 Ethernet Switches
To Next Page
Loading...
