Table 24: AC Power Cord Specifications (continued)
Plug TypePlug StandardsElectrical SpecificationsCountry/Region
PRC/3GB 1002-1996250 VAC, 10 A, 50 HzChina
VIIGCEE (7) VII250 VAC, 10 A, 50 HzEurope (except Italy,
Switzerland, and United
Kingdom)
IND/3IS 1293250 VAC, 10 A, 50 HzIndia
IL/3GSI 32/1971250 VAC, 10 A, 50 HzIsrael
I/3GCEI 23-16250 VAC, 10 A, 50 HzItaly
KC-001 and
KC-003?
SS-00259 ?125 VAC, 12 A, 50 Hz or 60 HzJapan
VIIGKCEE (7) VII250 VAC, 10 A, 50 Hz or 60 HzKorea
KC-003?C22.2 ?125 VAC, 13 A, 60 HzNorth America
ZA/3SABS 164/1:1992250 VAC, 10A, 50 HzSouth Africa
12GSEV 6534-2250 VAC, 10 A, 50 HzSwitzerland
?CNS 690 or IEC60884-1;CNS
10917-2, -3 ?
125 VAC, 11 A and 15 A, 50 HzTaiwan
BS89/13BS 1363/A250 VAC, 10 A, 50 HzUnited Kingdom
NOTE: For Taiwan, more than one power cord is provided in the box.
Figure 20 on page 67 illustrates the plug on the power cord for each country or region
listed in Table 24 on page 66.
Figure 20: AC Plug Types
Related
Documentation
• Power Supply in EX2200 Switches on page 18
• General Safety Guidelines and Warnings on page 155
• General Electrical Safety Guidelines and Warnings on page 179
• Prevention of Electrostatic Discharge Damage on page 180
67Copyright © 2011, Juniper Networks, Inc.
Chapter 7: Planning Power Requirements
To Next Page
Loading...
Need help?
General
