Juniper EX2200 Series User Manual

CHAPTER 7
Planning Power Requirements
•
Power Specifications for EX2200 Switches on page 65
•
AC Power Cord Specifications for EX2200 Switches on page 66
Power Specifications for EX2200 Switches
This topic describes the power supply electrical specifications for EX2200 switches.
Table 22 on page 65 provides the AC power supply electrical specifications for EX2200
switches.
Table 23 on page 65 provides the DC power supply electrical specifications for EX2200
switches.
Table 22: AC Power Supply Electrical Specifications for EX2200 Switches
SpecificationItem
100 through 240 VACAC input voltage
50 Hz/60 Hz nominalAC input line frequency
•
7 A at 100 VAC and 2.9 A at 230 VAC (for switches with ports equipped for
PoE)
•
1.8 A at 100 VAC and 0.5 A at 230 VAC (for switches with no ports equipped
for PoE)
AC system current rating
Table 23: DC Power Supply Electrical Specifications for EX2200 Switches
SpecificationItem
36 through 75 VDCDC input voltage
3.5 A maximumDC input current
100 WPower supply output
1 ms minimumOutput holdup time
65Copyright © 2011, Juniper Networks, Inc.

Juniper EX2200 Series Specifications

General

Product Series	EX2200 Series
Operating Temperature	32° to 104° F (0° to 40° C)
Ports	24 or 48 10/100/1000 Ethernet ports, 4 SFP uplink ports
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
JUNOS Software	JUNOS Software
Layer 2 Features	VLAN
Layer 3 Features	Static routing, RIP, OSPF, VRRP
Management	CLI, SNMP
Humidity	5% to 90% non-condensing