Juniper EX2200 Series User Manual

CHAPTER 17
Installation and Maintenance Safety
Information
•
Installation Instructions Warning on page 165
•
Chassis Lifting Guidelines for EX2200 Switches on page 166
•
Ramp Warning on page 167
•
Rack-Mounting and Cabinet-Mounting Warnings on page 167
•
Wall-Mounting Warnings for EX2200 Switches on page 171
•
Grounded Equipment Warning on page 172
•
Maintenance and Operational Safety Guidelines and Warnings on page 172
Installation Instructions Warning
This topic applies to hardware devices in the EX Series product family, which includes
switches and the XRE200 External Routing Engine.
This topic also applies to hardware devices in the QFX Series.
WARNING: Read the installation instructions before you connect the device
to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingenvoordatuhetsysteem
met de voeding verbindt.
Varoitus Lue asennusohjeetennen järjestelmänyhdistämistävirtalähteeseen.
Attention Avant de brancher lesystèmesur la sourced'alimentation,consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultarele istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
165Copyright © 2011, Juniper Networks, Inc.

Juniper EX2200 Series Specifications

General

Product Series	EX2200 Series
Operating Temperature	32° to 104° F (0° to 40° C)
Ports	24 or 48 10/100/1000 Ethernet ports, 4 SFP uplink ports
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
JUNOS Software	JUNOS Software
Layer 2 Features	VLAN
Layer 3 Features	Static routing, RIP, OSPF, VRRP
Management	CLI, SNMP
Humidity	5% to 90% non-condensing