CHAPTER 6
Cable Specifications
•
Network Cable Specifications for EX2200 Switches on page 63
Network Cable Specifications for EX2200 Switches
EX2200 switches have interfaces that use various types of network cables.
For instructions on connecting the switch to a network for out-of-band management
using an Ethernet cable with an RJ-45 connector, see “Connecting an EX Series Switch
to a Network for Out-of-Band Management” on page 113.
For instructions on connecting the switch to a management console using an Ethernet
cable with an RJ-45 connector, see “Connecting an EX Series Switch to a Management
Console” on page 115.
For instructions on connecting a fiber-optic cable to the switch, see “Connecting a
Fiber-Optic Cable to an EX Series Switch” on page 121.
Related
Documentation
• Management Port Connector Pinout Information for an EX2200 Switch on page 24
• Console Port Connector Pinout Information for an EX Series Switch on page 23
• EX2200 Switches Hardware Overview on page 3
63Copyright © 2011, Juniper Networks, Inc.
To Next Page
Loading...
