Juniper EX2200 Series User Manual

CHAPTER 19
Compliance Information
•
Agency Approvals for EX Series Switches on page 197
•
Compliance Statements for EMC Requirements for EX Series Switches on page 198
•
Compliance Statements for Acoustic Noise for EX Series Switches on page 201
•
Declaration of Conformity for EX2200 Switches on page 202
Agency Approvals for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes
switches and the XRE200 External Routing Engine.
These hardware devices comply with the following standards:
•
Safety
•
CAN/CSA-C22.2 No. 60950-1 (2007) Information Technology Equipment
•
UL 60950-1 (2nd Ed.) Information Technology Equipment
•
EN 60950-1 (2006) Information Technology Equipment
•
IEC 60950-1 (2005) Information Technology Equipment
•
EN 60825-1 (2007) Safety of Laser Products - Part 1: Equipment classification and
requirements
•
EMC
•
FCC 47CFR Part 15 Class A (USA)
•
EN 55022 Class A Emissions (Europe)
•
ICES-003 Class A
•
VCCI Class A (Japan)
•
AS/NZS CISPR 22 Class A (Australia/New Zealand)
•
CISPR 22 Class A
•
EN 55024
197Copyright © 2011, Juniper Networks, Inc.

Juniper EX2200 Series Specifications

General

Product Series	EX2200 Series
Operating Temperature	32° to 104° F (0° to 40° C)
Ports	24 or 48 10/100/1000 Ethernet ports, 4 SFP uplink ports
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
JUNOS Software	JUNOS Software
Layer 2 Features	VLAN
Layer 3 Features	Static routing, RIP, OSPF, VRRP
Management	CLI, SNMP
Humidity	5% to 90% non-condensing