Juniper EX2200 Series User Manual

Table 15: Optical Interface Support for Fast Ethernet SFP Transceivers in EX2200 Switches
except EX2200-C Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1FE-LHModel Number100BASE-LH (or
100BASE-ZX)
100 MbpsRate
LCConnector Type
DualFiber Count
1310 nmTransmitter Wavelength
–5 dBmMinimum Launch Power
0 dBmMaximum Launch Power
–32 dBmMinimum Receiver Sensitivity
–8 dBmMaximum Input Power
SMFFiber Type
9/125 µmCore/Cladding Size
–Modal Bandwidth
80 km (49.7 miles)Distance
Junos OS for EX Series switches, Release 11.2 or laterSoftware Required
Copyright © 2011, Juniper Networks, Inc.42
Complete Hardware Guide for EX2200 Ethernet Switches

Juniper EX2200 Series Specifications

General

Product Series	EX2200 Series
Operating Temperature	32° to 104° F (0° to 40° C)
Ports	24 or 48 10/100/1000 Ethernet ports, 4 SFP uplink ports
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
JUNOS Software	JUNOS Software
Layer 2 Features	VLAN
Layer 3 Features	Static routing, RIP, OSPF, VRRP
Management	CLI, SNMP
Humidity	5% to 90% non-condensing