Table 16: Optical Interface Support and Copper Interface Support for SFP Transceivers in
EX2200-C Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1GE-LHModel Number1000BASE-LH (or
1000BASE-ZX)
1000 MbpsRate
LCConnector Type
DualFiber Count
1550 nmTransmitter Wavelength
–2 dBmMinimum Launch Power
5 dBmMaximum Launch Power
–25 dBmMinimum Receiver Sensitivity
–3 dBmMaximum Input Power
SMFFiber Type
9/125 µmCore/Cladding Size
–Modal Bandwidth
70 km (43.5 miles)Distance
Junos OS for EX Series switches, Release 11.3Software Required
Related
Documentation
• EX2200 Switches Hardware Overview on page 3
• Installing a Transceiver in an EX Series Switch on page 99
• Removing a Transceiver from an EX Series Switch on page 137
Copyright © 2011, Juniper Networks, Inc.48
Complete Hardware Guide for EX2200 Ethernet Switches
To Next Page
Loading...
