Juniper EX2300 Series - Register Products-Mandatory to Validate Slas

Table 35: Parts List for EX2300 Switches (Connued)
Component Quanty
Mounng screws to aach the mounng brackets to the switch chassis:
• EX2300-C switch—separately orderable
• EX2300 switch—provided
8
Rubber feet (preinstalled on the chassis) 4
Ethernet cable with RJ-45 connectors aached and an RJ-45 to DB-9 serial port adapter—provided 1
Documentaon Roadmap 1
Paper license for Virtual Chassis (only for the models EX2300-C-12T-VC, EX2300-C-12P-VC,
EX2300-24T-VC, EX2300-24P-VC, EX2300-48T-VC, and EX2300-48P-VC)
1
Juniper Networks Product Warranty 1
End User License Agreement 1
NOTE: You must provide mounng screws that are appropriate for your rack or cabinet to mount
the switch on a rack or a cabinet.
Register Products—Mandatory to Validate SLAs
Register all new Juniper Networks hardware products and changes to an exisng installed product using
the Juniper Networks website to acvate your hardware replacement service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website and
update the installaon base data if there is any addion or change to the installaon
103