• Some parts of the chassis, including AC and DC power supply surfaces, power supply unit handles,
SFB card handles, and fan tray handles might become hot. The following label provides the warning
of the hot surfaces on the chassis:
• Always ensure that all modules, power supplies, and cover panels are fully inserted and that the
installaon screws are fully ghtened.
Denions of Safety Warning Levels
The documentaon uses the following levels of safety warnings (there are two
Warning
formats):
NOTE: You might nd this informaon helpful in a parcular situaon, or you might overlook this
important informaon if it was not highlighted in a Note.
CAUTION: You need to observe the specied guidelines to prevent minor injury or
discomfort to you or severe damage to the device.
Aenon Veillez à respecter les consignes indiquées pour éviter toute incommodité ou
blessure légère, voire des dégâts graves pour l’appareil.
LASER WARNING: This symbol alerts you to the risk of personal injury from a laser.
Averssement Ce symbole signale un risque de blessure provoquée par rayon laser.
WARNING: This symbol means danger. You are in a situaon that could cause bodily
injury. Before you work on any equipment, be aware of the hazards involved with
electrical circuitry and be familiar with standard pracces for prevenng accidents.
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situae
die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken,
264
To Next Page
Loading...
Need help?
General
