Juniper EX2300 Series Hardware Guide

Aviso O disposivo foi criado para operar com sistemas de corrente TN.
¡Atención! El equipo está diseñado para trabajar con sistemas de alimentación po TN.
Varning! Enheten är konstruerad för användning llsammans med elkrassystem av TN-
typ.
Agency Approvals for EX Series Switches
IN THIS SECTION
Compliance Statement for Argenna | 300
This topic applies to hardware devices in the EX Series product family, which includes EX Series
switches, the EX Series Redundant Power System (RPS), and the XRE200 External Roung Engine.
These hardware devices comply with the following standards:
• Safety
• CAN/CSA-C22.2 No. 60950-1 Informaon Technology Equipment
• UL 60950-1 Informaon Technology Equipment
• EN 60950-1 Informaon Technology Equipment
• IEC 60950-1 Informaon Technology Equipment
• EN 60825-1 Safety of Laser Products - Part 1: Equipment classicaon and requirements
• EMC
• FCC 47CFR Part 15 Class A (USA)
• EN 55022 Class A Emissions (Europe)
• ICES-003 Class A
• VCCI Class A (Japan)
• AS/NZS CISPR 22 Class A (Australia/New Zealand)
299

Juniper EX2300 Series Specifications

General

Software	Junos OS
Model	EX2300
Ports	24 or 48 10/100/1000BASE-T ports
Uplinks	4 x 1GbE/10GbE SFP+/SFP uplinks
Power Supply	Internal or external power supply options
Rack Units	1U
PoE/PoE+ Ports	Available on some models (EX2300-C and EX2300)
Operating Temperature	0° to 45°C
Input Voltage	100 to 240 VAC
Layer 3 Features	RIP, OSPF, VRRP
Layer 2 Features	VLAN, STP, RSTP, MSTP, LACP
Security Features	802.1X, DHCP snooping
Management	CLI, Web UI, SNMP