Juniper EX2300 Series - Clearance Requirements for Airflow and Hardware Maintenance for EX2300 Switches

Use the wall-mount kit from Juniper Networks to mount the switch on a wall. The wall-mount kit is not
part of the standard package and must be ordered separately.
SEE ALSO
Mounng an EX2300 Switch on a Desk or Other Level Surface | 106
Mounng an EX2300-C Switch Under a Desk or Other Level Surface by Using Screws | 108
Mounng an EX2300 Switch on a Wall | 119
Clearance Requirements for Airow and Hardware Maintenance for
EX2300 Switches
When planning the site for installing an EX2300 switch, you must allow sucient clearance around the
installed switch. Figure 40 on page 68 shows the clearance requirements for the EX2300-C switches.
Figure 41 on page 69 shows the clearance requirements for EX2300 switches, except the EX2300-C,
EX2300-24MP, and EX2300-48MP switches, with PoE capability. Figure 42 on page 70 shows the
67