Juniper EX2300 Series - Chassis Component Alarm Conditions on EX2300 Switches

SEE ALSO
Dashboard for EX Series Switches | 184
Chassis Component Alarm Condions on EX2300 Switches
This topic describes the chassis component alarm condions on EX2300 switches.
Table 57 on page 233 lists the alarm condions on EX2300 switches, their severity levels, and the
acons you can take to respond to them.
Table 57: Alarm Condions on EX2300 Switches
Chassis
Component
Alarm Condion Alarm
Severity
Remedy
Temperature The temperature
inside the chassis
reaches the yellow
alarm limit.
Minor
(yellow)
• Check the fan.
• Open a support case using the Case Manager link
at hps://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
The temperature
inside the chassis
reaches the red alarm
limit.
Major (red)
• Check the fan.
• Open a support case using the Case Manager link
at hps://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
The temperature
sensor has failed.
Major (red) Open a support case using the Case Manager link at
hps://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
233