Juniper EX2300 Series - Page 20

3—
Protecve earthing terminal
Figure 8: Rear Panel of an EX2300-C Switch with 12 Gigabit Ethernet Ports without PoE Capability
1—
CLEI code label
3—
Protecve earthing terminal
2—
Serial number ID label
4—
AC power cord inlet
The rear panel of the EX2300 switch except the EX2300-C, EX2300-24MP, and EX2300-48MP switch
models consists of the following components:
• One management Ethernet port that supports an RJ-45 connector
• One console port that supports an RJ-45 connector
• One protecve earthing terminal
• One ESD point
• Air exhaust openings
• Serial number ID label
• CLEI code label
• One AC power cord inlet or DC power terminals
• One USB port
Figure 9 on page 12 shows the rear panel of an AC-powered EX2300 switch with 24 Gigabit Ethernet
ports with PoE capability except the EX2300-24MP model and Figure 10 on page 12 shows the rear
panel of an EX2300 switch with 48 Gigabit Ethernet ports with PoE capability except the EX2300-48MP
model. Figure 11 on page 13 shows the rear panel of an AC-powered EX2300 switch with 24 Gigabit
Ethernet ports without PoE capability and Figure 12 on page 13 shows the rear panel of an EX2300
switch with 48 Gigabit Ethernet ports without PoE capability. Figure 13 on page 14 shows the rear
panel of a DC-powered EX2300 switch with 24 Gigabit Ethernet ports.
11