Juniper EX2300 Series Hardware Guide

• To clean the transceiver canal, use an appropriate ber-cleaning device such as RIFOCS Fiber
Opc Adaptor Cleaning Wands (part number 946). Follow the instrucons in the cleaning kit you
use.
• Aer cleaning the transceiver, make sure that the connector p of the ber-opc cable is clean.
Use only an approved alcohol-free ber-opc cable cleaning kit such as the Opptex Cletop-
S
®
Fiber Cleaner. Follow the instrucons in the cleaning kit you use.
229

Juniper EX2300 Series Specifications

General

Software	Junos OS
Model	EX2300
Ports	24 or 48 10/100/1000BASE-T ports
Uplinks	4 x 1GbE/10GbE SFP+/SFP uplinks
Power Supply	Internal or external power supply options
Rack Units	1U
PoE/PoE+ Ports	Available on some models (EX2300-C and EX2300)
Operating Temperature	0° to 45°C
Input Voltage	100 to 240 VAC
Layer 3 Features	RIP, OSPF, VRRP
Layer 2 Features	VLAN, STP, RSTP, MSTP, LACP
Security Features	802.1X, DHCP snooping
Management	CLI, Web UI, SNMP