Juniper EX2300 Series Hardware Guide

Table 2: CLI Equivalents of Terms Used in Documentaon for EX2300 Switches (Connued)
Hardware
Item (as
Displayed
in the CLI)
Descripon (as
Displayed in the CLI)
Value
(as
Displa
yed in
the
CLI)
Item in
Document
aon
Addional Informaon
One of the
following:
• 2x10G SFP/SFP+
or
• 4x10G SFP/SFP+
• 4x1G/10G
SFP/SFP+
•
6x10G SFP/SFP+
•
6x1G/10G
SFP/SFP+
PIC 1 Built-in
uplink
ports on
the front
panel of
the switch
"EX2300 Switches Hardware Overview" on page 2
Xcvr ( n ) Abbreviated name of
the transceiver
n is a
value
equiva
lent to
the
numb
er of
the
port in
which
the
transc
eiver
is
install
ed.
Opcal
transceiver
s
"Pluggable Transceivers Supported on EX2300
Switches" on page 75
22

Juniper EX2300 Series Specifications

General

Software	Junos OS
Model	EX2300
Ports	24 or 48 10/100/1000BASE-T ports
Uplinks	4 x 1GbE/10GbE SFP+/SFP uplinks
Power Supply	Internal or external power supply options
Rack Units	1U
PoE/PoE+ Ports	Available on some models (EX2300-C and EX2300)
Operating Temperature	0° to 45°C
Input Voltage	100 to 240 VAC
Layer 3 Features	RIP, OSPF, VRRP
Layer 2 Features	VLAN, STP, RSTP, MSTP, LACP
Security Features	802.1X, DHCP snooping
Management	CLI, Web UI, SNMP