Juniper EX2300 Series - Page 4

Requirements for Mounng an EX2300 Switch On or Under a Desk or Other Level Surface or
On a Wall | 66
Clearance Requirements for Airow and Hardware Maintenance for EX2300 Switches | 67
EX2300 Network Cable and Transceiver Planning | 75
Pluggable Transceivers Supported on EX2300 Switches | 75
SFP+ Direct Aach Copper Cables for EX Series Switches | 77
Understanding EX Series Switches Fiber-Opc Cable Signal Loss, Aenuaon, and Dispersion | 79
Calculang the Fiber-Opc Cable Power Budget for EX Series Devices | 81
Calculang the Fiber-Opc Cable Power Margin for EX Series Devices | 81
EX2300 Management Cable Specicaons and Pinouts | 83
Management Cable Specicaons | 84
Console Port Connector Pinout Informaon | 84
USB Port Specicaons for an EX Series Switch | 85
Mini-USB Port Pinout Specicaons | 86
RJ-45 Management Port Connector Pinout Informaon | 87
RJ-45 Port, SFP Port, SFP+ Port, QSFP+ Port, and QSFP28 Port Connector Pinout Informaon | 87
SFP+ Uplink Port Connector Pinout Informaon for an EX2300 Switch | 94
RJ-45 Management Port Connector Pinout Informaon | 96
RJ-45 to DB-9 Serial Port Adapter Pinout Informaon | 96
EX2300 Virtual Chassis | 97
Planning EX2300 Virtual Chassis | 98
Understanding EX2300 Virtual Chassis Hardware Conguraon | 98
3
Inial Installaon and Conguraon
Unpacking and Mounng the EX2300 Switch | 101
Unpacking an EX2300 Switch | 101
Parts Inventory (Packing List) for an EX2300 Switch | 102
Register Products—Mandatory to Validate SLAs | 103
iv