Juniper EX2300 Series - Page 98

Table 29: SFP Network Port Connector Pinout Informaon (Connued)
Pin Signal Descripon
3 TX_Disable Transmier disabled
4 SDA 2-wire serial interface data line
5 SCL- 2-wire serial interface clock
6 MOD_ABS Module absent
7 RS Rate select
8 RX_LOS Receiver loss of signal indicaon
9 VeeR Module receiver ground
10 VeeR Module receiver ground
11 VeeR Module receiver ground
12 RD- Receiver inverted data output
13 RD+ Receiver noninverted data output
14 VeeR Module receiver ground
15 VccR Module receiver 3.3 V supply
16 VccT Module transmier 3.3 V supply
17 VeeT Module transmier ground
89