K-TRON K-Vision User Manual

1 Programming Reference
1.7 Machine setup menu
Page 38 Docu-No.: 0590020601-EN Rev. 1.6.0
MAX MOT SPEED - [rpm]
Maximum Motor Speed
Input of the maximum motor rpm for 100% drive command.
Input range: Drive specific. Default: drive specific
(See nameplate on motor for value)
MDU STATUS
MDU Status
The MDU status codes reveal operational condition of the Drive. See
listing of MDU status codes in section 5.4.1.
DC CEILING-[%]
Drive Command Ceiling
Limitation of the drive command output to the motordrive.
Input range: 10 to 125% Default: 110%
Parameter
Definition
Table page 2 of 2

K-TRON K-Vision Specifications

General

Brand	K-TRON
Model	K-Vision
Category	Control Panel
Language	English