1 Programming Reference
Page 10 Docu-No.: 0590020601-EN Rev. 1.6.0
1.0.4 Menu and sub-menu listing
• Product Change menu
• Calibration menu
– Calibration sub-menu
– Feedfactor sub-menu
• Alarm menu
– Alarm limits sub-menu
– Alarm setup sub-menu
• Tuning menu
• Refill menu
• Scale menu
– General sub-menu
– SFT sub-menu
• Machine
– General sub-menu
– Motor sub-menu
– Service setup sub-menu
– Performance sub-menu
– Actiflow sub-menu -appears when a actiflow is connected to
KCM
• I-O Setup menu
– Digital Input sub-menu
– Digital Output sub-menu
– Setpoint Input sub-menu
– Analog Output sub-menu
– Modbus I/O sub-menu
• Loader menu-hidden if HCU or LSR is connected
• HCU Loader menu-appears when HCU is connected to KCM
• LSR Loader menu-appears when LSR is connected to KCM
•System menu
– Communications sub-menu
– SW Versions sub-menu
– Parameter Backup sub-menu
• Security menu
To Next Page
Loading...
Need help?
General
