Docu-No.: 0590020601-EN Rev. 1.6.0 Page 7
Programming Reference 1
1 Programming Reference
1.0.1 Additional programming information
See instructions below for information on the following points::
• User interface operation; keypad and display function
• For feeder calibration
• General operation
• Technical specifications
See operating manual for operator instruction with safety notes
The following programming instructions covers LWF application
programming for the displays KSU-II/KCM, KSL, K-Vision, KSC.
This manual is only for skilled staff instructed by K-Tron.
The menu architecture for the application is the same for all displays.
The main differences between the displays are the navigation and the
short variable name for the KSU-II/KCM.
0490020611 = KCM-KD / KSU-II operation with calibration
procedures
1090020602 = KCM-GD operation with calibration procedures
0690020604 = K-Vision operation with calibration procedures
0490020602 = KSC operation with calibration procedures
0290020613 = KSL operation with calibration procedures
0490020614 = Smart Connex II Overview
0690020601 = KCM General PC Utilities
0490020605 = KCM Electronics
1090020601 = KCM GD Electronics
To Next Page
Loading...
