K-TRON K-Vision - Manual Notation

1 Programming Reference
Page 8 Docu-No.: 0590020601-EN Rev. 1.6.0
1.0.2 Manual notation
The following is standard through out this manual.
• KSU-II / KCMParameter name shown as <PARAM NAME>
• KSL / KSC Parameter name shown as <Param Name>
• Parameter value shown as <Param Value>
• Menu name as <Menu NAME>
• Alarm message as <Alarm Message>
• Display indication or key action result as <INDICATION>.
• Dialog box indication as <Dialog>.
• Key or button as KEY
The first parameter name (in CAPs) is for KSU-II/KCM display. The
second parameter name below the first is for the KSL and KSC.
The BOLD PARAMETERS are command functions for the KSU-II/
KCM. For KSL and KSC functions keys are used instead of command
functions.