K-TRON K-Vision User Manual

Docu-No.: 0590020601-EN Rev. 1.6.0 Page 81
Appendix 5
Special KCM LWF features 5.1
gear ratio. The screw speed modulation algorithm will automatically
use the correct gear reduction.
To operate the gear switch manually, the user can select High or Low
to the GEARSWITCH parameter in the PRODUCT CHANGE menu.
To operate the gear switch automatically, the user can select Auto Hi
or Auto Lo to the GEARSWITCH parameter in the PRODUCT
CHANGE menu.
When entering a setpoint which will generate a drive command of
more than 50% and the GEARSWITCH is on Auto Lo, the gear will
switch to high and the GEARSWITCH parameter changes to Auto Hi.
When entering a setpoint which will generate a drive command of less
than 10% and the GEARSWITCH is on Auto Hi, the gear will switch to
low and the GEARSWITCH parameter changes to Auto Lo.

K-TRON K-Vision Specifications

General

Brand	K-TRON
Model	K-Vision
Category	Control Panel
Language	English