Kaypro 2 - 15-18.TIFF

KAYPRO RCBIE SYMPl'<M-FIX GJIIE (a:N!'1 D. )
CCNDITICN
No output to
serial printer
(cont'd)
PCSSIBLE CAUSE
Printer is assigned
as parallel by SI'AT
Baud rate 0 f printer
does not match baud
rate of canputer
RECc::M1ENDED ACTICN
Use srAT to assign printer device
to serial: type:
SI'AT IST:=rrY:
Use CCNFIG to set baud rate fur
serial port
Defective power supply Check voltages (esp.-12 V) at
IXMer supply output: replace po.ver
supply
De:fecti ve keyboard Replace keyboard
No characters on
video when keys
struck on keyboard
De fecti ve harness
De fecti ve mainboard
De:fecti ve keyl:oard
coil cord
Check voltages (esp.-l2V) at main
l:oard IXMer connector: replace
harness
Replace mairiboard
Replace coil cord
Keyl:oard connector on Check fur shorted contacts on
mairiboard defective keyl:oard plug: esp. soldering to
main l:oard
De fective mairiboard Replace mairiboard
Wrong characters
De fecti ve keyboard
15-18
Replace keyl:oard