Kaypro 2 - IDX.TIFF

INDEX
220V configuration, 8-2
align .mac, 7-5
aligning CRI' yoke, 7-2
ASCII chart, 17-1
brightness, 7-2
chassis hood, 5-1
CRI' adjustments, 7-1
CRI' assenbly rerroval, 7-8
CRI' descriptions, 7--1
disk drive cleaning, 9--1
diskette drive configuration, 9-5
diskette drive identification, 9-2
diskette drives, 9--1
Drivetec, 9-9
focus, 7--2
fuse, 8-2
hard disk drive, 10--1
hard drive configuration, 10-3
hard drive controller roard, 11--1
hard drive rercoval, 10-4
high-densi ty (Dri vetec) drives, 9-9
horizontal centering, 7-1
horizontal hold, 7-2
horizontal width, 7-1
I/O port addresses, 16--10
interface board KAYPRO 10, 12-1
internal modem, 16--14
KAYPRO 1'1' block diagram, 6-18
KAYPRO 10 specifications, 3--1
KAYPRO 2 and 4 block diagram, 6-6
KAYPRO 2 specifications, 3--1
KAYPRO 2/84 and 2X specifications, 3-2
KAYPRO 4 specifications, 3-3
KAYPRO 4/84 specifications, 3-4
KAYPRO 4X specifications, 3-5
KAYPRO ROBIE speci fications, 3-7
keyboard 13--1
, I
keyboard codes and functions, 16--3
keyboard corlnector, 16-6
mainboard rerroval, 6--51
mainb:>ards, 6-1
men:ory maps, 17--3
modem port KAYPRO 1'1', 16-7
parallel printer port, 16--5
power supplies, 8-1
power supply rerroval, 8-5
real-time clock, 16-12
ROBIE removal/installation, 14--1
serial port KAYPRO 2 and 4, 16-6
serial printer port KAYPRO 10, 16--7.1
touch-up information, 5-2
troubleshooting, 15-1
vendor addresses, 17--6
vertical size and linearity, 7-1
video alignment, 7-3
video a::mnand protocol, 16--1