KEB COMBIVERT F5-A User Manual

Special functions
© KEB, 2012-10 COMBIVERT F5-A, -E, -H Page 7.15 - 29
7
cn.00 PID reference source
cn.01 PID absolute reference
-400,0...400,0 %
0
1
2
3
4
off
Analog input AN1 (ru.28)
Analog input AN2 (ru.30)
Analog input AN3 (ru.32)
Aux input (ru.53)
PID controller
+
+
PID controller absolute reference (cn.01)
The setpoint of the PID controller is preset in percentage with cn.01 within the range of -400.0…400.0%. The
parameter is set-programmable.
PID reference source (cn.00)
Parameter cn.00 determines which input supplies the additional setpoint. The following options are available:
cn.00 PID reference source
Va-
lue
Explanation
0 off (default)
1 Analog input AN1 (ru.28)
2 Analog input AN2 (ru.30)
3 Analog input AN3 (ru.32)
4 Aux input (ru.53)
If one of the analog channels is adjusted, the signals can be adapted with the analog ampliers individually to
the requirements (see chapter 6.2).

KEB COMBIVERT F5-A Specifications

General

Brand	KEB
Model	COMBIVERT F5-A
Category	Control Unit
Language	English