1
Getting Started
Quick Start — Of the following section topics, three can be used immediately to quickly
acquaint yourself with fundamental instrument operations. Use QS1 to familiarize your-
self with front panel controls, use QS2 to power-up the instrument, and, finally, use QS3 to
perform exercises to operate the instrument.
• General information — Covers general information that includes contact infor-
mation, safety symbols and terms, inspection, and available options and accesso-
ries.
• Model 2750 features — Summarizes the features of Model 2750.
• Plug-in switching modules — Summarizes the capabilities of the Keithley
Model 77XX series switching modules.
QS1 • Front and rear panel familiarization — Summarizes the controls and connectors
of the instrument.
• Rack mounting — Covers the options available for rack mounting the Model 2750
in a standard 19-inch rack.
QS2 • Power-up — Covers line power connection, line voltage setting, fuse replacement,
power line frequency, and the power-up sequence.
• Display — Provides information about the display of the Model 2750.
• Defaults and user setups — Lists the *RST and factory default settings, and cov-
ers the three setup configurations available to the user.
• Remote programming information — Explains how SCPI commands are pre-
sented in this manual.
QS3 • Quick start exercises — Provides abbreviated operating information and exercises
(front panel and remote programming) to acquaint a user with operation basics.
2750-900-01.book Page 1 Wednesday, August 3, 2011 7:56 AM
To Next Page
Loading...
Need help?
General
