96 | 09 Creating your own voices
• MASTER VOL: Touch button and turn the data knob to manage the master volume as
an alternative to the physical sliders on the front panel.
• INSERT GAIN: It allows to reduce the level of the EFX Insert.
• TAP ON/TAP OFF: Press this button twice to calculate the BPM to set to the active
Delay effect.
At the bottom right, two buttons with arrows allow you to scroll the screen to the right (or
left) to display seven pages of parameters. Page 1 is the one described above, now we see
page 2 of 7.
Options:
• RANGE: These two parameters establish the sound extension RANGE assigned to each
layer by setting the lower limit and upper limit notes (C#-2 to G8).
• VELOCITY: Similarly, you can define the range of KEY VELOCITY by setting the
minimum and maximum value for each layer. In this way, depending on the dynamics
with which the keyboard key is pressed, different sounds can be played. If you set a
fixed KEY VELOCITY, you can define its value in the FIXED KEY frame independently for
each layer.
• SLOPE: This parameter sets the slope of the envelope (to be modified in relation to
the filter or amplitude).
• OFFSET: This parameter sets the amount of envelope intervention based on dynamics
(to be modified in relation to the filter or amplitude).
• NATURAL: It randomizes the Tempo for the 3 voices. It affects the voice playing as
first and the delay after the first voice. The available modes are On/Off and the tempo
up to Max (50ms). This is useful, for instance, with the Brass (Trumpet, Sax, Trombone).
• VELO PITCH: Off, Low, Medium, High.
To Next Page
Loading...
